Hardware
Software
AMOS
Support
Contact
Store
SSD Verification

Purpose

This page gives the possible SSD numbers for specific SSDIAG results. These results may be used to either validate the SSDIAG results or to get a list of possible SSD numbers for a given set of results (assumes the SSD chip is not broken).

Getting the SSDIAG results

Log Sys:

Run SSDIAG

 

If the program responds:

  • NO SSD data file found. Do you wish to create one??

    Respond with:

    Y

    But be aware that the SSD chip is NOT being tested, just read. The program does not know if the return code is correct. Running SSDIAG again will test it a little bit more.

After the program runs, get the results with the following command:

Type SSDiag.DAT

These numbers displayed should be entered on the form below.


Enter SSDIAG Codes

Please enter all eight SSDIAG values in the following fields:

If you have cut-and-paste capabilities, you may instead paste the SSDIAG numbers directly into the following field:

When finished, submit this form using the Submit button. If you make a mistake, you may start over using the Clear button.